DIRECTV error code 726 is quite rampant and some users experience it when attempting to tune in to particular channels or watch given content on the DIRECTV receivers. In this blog post, we will explore further more about this error code, some of the possible causes of the error, and the possible solutions that can be done to fix the error on your end.
DIRECTV Error Code 726 is a comprehensive error code that indicates several problems with the customer’s account and payment method.
If you get an on-screen message with code 726 when you try to switch channels or watch video on demand, this shows that the communication authorization between your receiver and DIRECTV authorization servers has failed.
In layman’s language, this occurs when your receiver fails to authenticate your account details and the programs or channels you have the right to subscribe to. If this verification check fails, then DIRECTV denies access due to security measures.
Here Is The List of Some Common Causes That lead to Error Code 726 In DIRECTV.
Several potential factors can trigger a 726 error message on your DIRECTV receiver:
Account status issues – This consists of cases where the users have unpaid bills or accounts deactivated or suspended, and this will make the authorizations fail.
Connection problems – Disruptions with satellite dish connections, broadband internet connections for internet-connected Genie DVRs, or coaxial cabling disrupt the authorization process.
There are general problems such as faulty components in the hardware or software of the receiver Firmware problems that may occasionally cause authorization verification problems.
Interference - This is caused by different factors such as bad weather, trees, and buildings amongst others that might affect the satellite signal path.
Learn how to resolve issues with your DIRECTV when you are faced with the DIRECTV error code 726.
If you've encountered error code 726 on your DIRECTV receiver, here are some basic troubleshooting tips to resolve it:
Check Your Account Status
The first check one normally performs is to check whether there are account holds, suspensions, or other issues that would cause an authorization problem. It is possible to know the current status of your account on the website or in the application of the mentioned company by dialing the number mentioned above. Hopefully, most account issues should be ruled out first before one gets to delve deeper.
Check Your Receiver Connections
Check all the wiring connections behind your DIRECTV installation process, especially in the cabling section. Check the center wire connections and ensure they are tight on all coax cables between the dish, the multi-switch if you have one, and the receiver. Check all these connections and ensure that they are well-tightened with better ones if the cables used are severely weathered or damaged.
Check whether Ethernet cables and power cables are properly connected if your receiver is using broadband connectivity as well. But always make sure that on the back of the Television, the power light is green and on the front of the DVR recording light is blinking. If not, you should disconnect and reconnect all the cables, and then power cycle the unit.
Reboot Your DIRECTV Receiver
If the connections are okay, then you can attempt to reboot your receiver using its red reset button for ten seconds until the front of the unit is dark. After the dismantling of the power, turn off the receiver for 15 seconds and then switch on the power, and wait for the reboot cycle to complete. Quite often, authorization communication issues can be resolved with a simple command that will require a reboot of the systems.
Check Signal Strength
The quality of the signals you are receiving could be occasionally checked through the receiver user interface on your dish. Click on Tools, then select Options, then click on Info & Test, Additional system information and look at the satellite transponder list. It is worth marking that any number above ninety is an indication of excellent signal quality. If you receive many transponders at low signal strength or if they are completely missing from your dish, you may have a problem with your dish alignment or its stability. Perhaps consider having a technician come and have a look at your dish placement and how your cables are run.
If you want to proceed with other troubleshooting procedures, call DIRECTV Support.
While the above-outlined steps will help to address this error for most customers, error 726 may occur due to other complex hardware issues that are hard to identify and resolve without the help of professional IT specialists. If the steps mentioned above do not help in getting rid of receiver error, then the last helpful step is to call 1-800-DIRECTV to get the technician support. Customer support can perform system tests on their end, send refresh signals, as well as decide if dish repointing/replacement is needed or if the customer may require a receiver swap if there is an equipment issue.
Specifically, I found DIRECTV Error 726 in the Conclusion.
Even though error message 726 is associated with authorization problems, such problems generally tend to have quite straightforward causes such as connection checks or account status. However, when left unresolved over time, it leads to service disruptions and the inability to air a program. Following are the self-help troubleshooting tips that one can follow, but if the issue is not resolved then he/she should contact DIRECTV’s technical personnel. Taking care of your DIRECTV equipment and maintaining an active account means that you always have entertaining TV without having issues such as code 726 hinder you.
Transform your viewing experience with DirecTV! Call us today at +1 855-213-2250 to explore our plans and find the perfect package for you. Our experts are ready to assist you and get you set up with top-notch entertainment. Don’t wait—contact us now!
