DIRECTV is arguably one of the biggest satellite TV companies in the United States. DIRECTV remotes are made with high-tech features and technology, but these remotes might misbehave or stop serving their intended functions. This usually prompts the customers to wonder whether there is a reset button on the DIRECTV remote available to them. It is hoped getting the reset functionality understood will help make the remote work again.
What a Reset Does
Well, resetting your DIRECTV remote means that it is put back to its initial state when the device is being manufactured. This deletes any codes or changes that have been made in the remote and allows one to pair it anew with the device. Resetting is important when your remote has faulty behavior or does not respond to your receiver as it used to. It clears the barriers, hurdles, counts, and all other things that could have been a hindrance to the achievement of a goal or target.
Locating the Reset Button
It’s important to understand that resetting a DIRECTV remote involves some steps based on the model you have. Indeed, most of the DIRECTV remotes come equipped with a resetting button. This is normally a small button situated on the rear part of the device next to the battery cover. It might be labeled as reset or it may just have a symbol like an ‘R’. The placement of this button is almost hidden, look closely at the margin to try and find it.
Using the Reset Method
Even if your particular remote does not boast an obvious reset button, there is no need for an alarm. It is still possible to do a reset via a button sequence approach but this will take some time. Here are the steps:
1. To perform this procedure, the DIRECTV receiver must be on.
2. The DIRECTV button is usually located at the top of the remote for you to access it easily.
3. If you have a universal remote, first point it towards the TV and press and hold the power button until it turns off, then point it towards the DIRECTV receiver and repeat the process.
4. When DIRECTV is highlighted, press the 9 key, then the 9 key again, then the 3 key.
5. Release the DIRECTV button and then press the button again.
This will reconnect your remote’s connection to the device, effectively resetting it. For a few seconds, you might observe that mode indicator lights begin either blinking or turning steady on. After each change, it is possible to reconnect and calibrate your remote to your receiver as well.
Re-Pairing Your Remote
After resetting a DIRECTV remote, it is again necessary to program the remote to work with the receiver. The process is quick and easy:
1. To program your remote: locate the MUTE and ENTER buttons on your remote; press them together while you are still holding the remote. There should be an option to highlight the green light under the DIRECTV logo that blinks twice.
2. Next enter the code to match your receiver model: For any Genie HD DVRs press enter 0140 For any other standard DIRECTV receivers press enter 0000. The remote light will be off for 2 seconds, and then there will be two quick blinks.
3. Last of all, press the CHANNEL UP button and that will lock the entered code, thus, making your remote paired and fully functional.
Other Tips and Notes
Here are some additional helpful points regarding resetting your DIRECTV remote:
- Resetting should bring all original remote functionality by the return of all these components. If one continues to have a problem with buttons after resetting, then the batteries might require replacement.
- You can also try putting new batteries on your remote if the remote is not functioning appropriately instead of resetting the remote immediately.
- In case of a reset, any buttons that were used for preset operations, as well as the lists of favorite channels, will have to be adjusted again.
- Frequent cycling can cause the battery to degrade faster than normal cycling rates. Avoid resetting unless the value deserves a reset.
- In the case of these remotes, if the reset or re-pairing does not address the problem, you may require professional service.
Another basic way of solving some of the issues with your remote for DIRECTV is by resetting your remote. Even if you are just familiar with the location of the dedicated reset button or the method using the alternate button sequence, you feel prepared to attempt solving things yourself. It’s really simple, just be sure to reconnect it after that and you should be okay.
Conclusion
Having issues using a remote control with your directv satellite service? Consider turning your thermostat to a different temperature and then back to its original position to prompt a reset, or use the 993 code reset command. If you want to reprogram your remote, this erases it back to factory condition to start with. Remember to link the remote control back with the receiver after resetting it to match it again. By following these instructions, you will be able to get your DIRECTV remote functioning in proper order in no time.
Transform your viewing experience with DirecTV! Call us today at +1 855-213-2250 to explore our plans and find the perfect package for you. Our experts are ready to assist you and get you set up with top-notch entertainment. Don’t wait—contact us now!
