Dish Network is among the leading satellite television service providers in the United States of America. When you sign up with Dish Network, you can receive over 300 HD channels, easy-to-use television guides, and new services such as Dish Anywhere which enables a customer to watch TV on their phone.
The remote control is still among the most important elements of the Dish Network installation. The Dish remote controls channel switching, program guide access, TV volume, and many more with ease. Dish remotes are usually on by default, but there is a need to power off them sometimes for battery conservation or even diagnosing some problems.
This is a quick guide explaining how to switch on and off your Dish Network remote correctly.
How to Check if Your Dish Remote is On?
To do this, you should first check on the power status of your Dish remote before you turn it off or on.
To check if your Dish remote is on:
- Direct your Dish remote towards your Dish receiver box, and then press the Power, Select, or Guide buttons.
- If the button on your receiver corresponding to the aforementioned button is also lit, your remote is on.
- If there are no lights on your receiver then go to the next part on how to turn on your Dish remote.
Dish Remote How to Turn On
If no operation is caused by any button on the dish remote, then the remote might be put off. Follow these instructions to power your Dish satellite remote back on:
- Now, identify the Power button on the top part of the Dish remote.
- Long press the Power button without releasing it for 3 seconds.
- This is followed by the button/key illumination turning on to indicate the fact that the remote is now on.
- Ensure the remote is working by pressing any button on it and checking for a blinking light on the Dish receiver.
If it is still off and non-responsive, then it could be time to replace the batteries before trying to power it up again.
In this video, I will be demonstrating how to change your Dish Remote to the off position.
Of course, it’s useful to familiarize yourself with how to handle your Dish Network remote when it’s time to shut it off as well. Here are some reasons you may want to power your Dish remote off completely:
- To replace remote batteries
- When putting your remote away for some time
- If your remote has a problem of freezing, the following procedures will help you to reset it.
- Save battery while not in the process of watching Dish TV
Use these quick steps to turn off your Dish satellite TV remote:
- Locate the Power button which is positioned on the top part of the Dish remote.
- Hold down the Power button for about 5 seconds without releasing it.
- The backlight/button illumination will turn off as a sign that the remote is currently in a power-off state.
- The remote is now off. To turn the remote back on, press and hold the Power button for 3 seconds again.
- Ensure the button on the remote is off by pressing buttons on it aimlessly – there should be no lights on the Dish box.
Dish Remote – Helpful Tips
Here are some additional useful tips for operating your Dish Network remote control:
- In case of replacing remote batteries, it is advisable not to interconnect new and old batteries since this hampers battery performance. It is recommended that batteries should always be replaced in pairs.
- Should your Dish remote appear to be unresponsive or slow down, flipping the switch at the back of the remote to turn the device off and then on again will usually deal with general unresponsiveness.
- Ensure that you place your Dish remote in a position where it can comfortably see the Dish receiver box without any hindrances to connectivity and signal strength.
- Universal remote codes were programmed to frequently used buttons such as Power and Input/Source of the TV or sound system remotes to reduce the need for remote swapping.
- Store your Dish remote in a hard case or a cover so that buttons are not pressed or damaged when not in use.
Now you have the key steps that will enable you to easily power off and power on the Dish satellite TV remote. Understanding simple on-and-off operations is crucial because many of the problems with the remote may arise at some point. Thus, having good batteries in your Dish remote and keeping it on helps you to have a good experience in channel surfing and Dish programming.
Ready to upgrade your TV experience? Call us now at (877) 471-4808 to find the perfect Dish Network plan for you! Don’t miss out on great entertainment—our team is here to help you choose the best package and get you started today.
