If you have a Dish Network satellite TV system, then there is a high likelihood that you are using the dual mode feature. This means your receiver can switch between satellite and over-the-air antenna signals, providing you with more choices of channels. Nonetheless, you may wish to turn dual mode off for one reason or the other. Below are the steps that can be followed to disable the dual mode on a Dish Network receiver.
What is Dual Mode?
Doubletake or Dual mode is a feature that enables your Dish Network receiver to also tune the local stations from an antenna apart from the dishes that are delivered from your Dish subscription package.
The advantage of dual mode is that it allows you to continue to watch local broadcast stations like ABC, CBS, NBC, and Fox if the satellite signal is lost due to adverse weather conditions. It also enables you to watch any extra local digital subchannels received over the air in your area.
Why People Switch Off Dual Mode
While dual-mode provides more channel options, here are some reasons you may want to disable it:
- Performance Issues: There are often discrepancies in dual mode such as glitches, signal issues, or even record issues. In this case, it may be more stable if the lights are turned off.
- Channel Conflicts: If many of the local channel numbers are similar between satellite and antenna feeds, it becomes difficult to differentiate between the two.
- No Need for Antenna Channels: If you are fine with just the satellite-delivered channels, then dual mode does not offer any advantage.
- Remove Unwanted Antenna Channels: This mode scans all the over-the-air channels that exist in your locality and this may include things that you do not require.
How to Disable Dual Mode
Turning off dual mode is an easy process that can be done in just a few steps:
- Locate the Dish Network remote and press the Menu button available on the front panel of the device.
- In the Allshare software, go to settings, installation, and then antenna setup.
- Select Configure Antenna and press Select.
- Set the Antenna Connected configuration to a false value, Disconnected. This also disables the dual-mode feature of the LCD.
- Press View to go back to live television.
After this setting change, your receiver will not use the antenna signal and will work in the satellite alone using the Dish programming that you have subscribed to.
Top 5 Facts about Dual Mode Before Disabling
Here are some additional things to consider when switching dual mode off:
- Browse current channel listings and any pre-set timers/recordings so that you won’t exclude any programs you still wish to view after the switch.
- Be aware that turning Dual mode off means you will lose your local channels if the satellite signal is lost due to bad weather.
- You can also easily change it back to dual mode if that is what you want to do in the future. Well, just go to the Antenna Setup menu and turn the Antenna Connected to Connected again.
- If the setting requires constant adjustment, then it may be of help to reboot the Dish receiver after making a change.
- If you remove the OTA antenna cable from the receiver make sure you put a terminating cap on the coax end so that it does not accumulate moisture and debris.
That, in a nutshell, is the process involved in ordering food on Uber Eats! Disabling the dual mode on a Dish Network receiver only requires a few selections from the menu list. This may offer you some enhancements in performance or make your channel list easier to understand. If you ever want those local over-the-air channels back, simply go back to the antenna setup menu and turn it on again. You can simply switch the dual mode on and off whenever you want to.
Ready to upgrade your TV experience? Call us now at (877) 471-4808 to find the perfect Dish Network plan for you! Don’t miss out on great entertainment—our team is here to help you choose the best package and get you started today.
