The DirecTV Genie Air remote helps you have a convenient way to operate your DirecTV receiver and television. The Genie Air remote has a modern and portable design and can be easily programmed according to the user’s desires making it easy to switch between channels and menu. Below are the steps that will enable you to program your DirecTV Genie Air remote to operate your devices.
Why Custom Program The Remote
With custom programming, it is possible to program the colored buttons and the device buttons that are on the Genie Air remote to operate other equipment like a sound system, DVD, or video game console apart from the DirecTV receiver. In so doing, you can use a single remote to control several devices to enhance comfort while doing so.
Prepare For Programming
To avoid this make sure you have charged batteries in the remote before programming it. You will also require the original remote that was included in the device that you want to program the Genie to operate. Make sure that the device is turned on and is ready to receive the signals it needs to capture.
Access Programming Mode
* First of all, you need to turn on your Philips TV remote for this you need to press the MUTE and ENTER buttons together till the green light at the top of the Philips TV remote blinks twice.
* When the green light starts blinking, let go of both buttons – you are in programming mode now.
Program A Device Button
To program one of the device buttons at the top of the remote:
Program the device button of your choice, for instance, the DVD button.
* Turn on the DVD player and locate the initial remote, then press the POWER button and hold it for a few seconds until the green light on the Genie Air blinks twice.
>Actuate a functionality button on the original DVD remote such as the PLAY or PAUSE button. The light of the genie will flash two times to indicate that it has been trained.
* Do this again if you want to program other buttons from the device’s original remote control. Please notice that you need to press and hold only the POWER button on the original remote for the first time.
Program A Colored Button
To program one of the red, green, yellow, and blue shortcut buttons:
* On the original device remote, press and hold the button that you wish to program on the Genie Air remote.
Holding it, press and hold the color button in the Genie Air remote to map the function until the bulb blinks twice.
Finish Programming
After the customization is done, one just needs to press the MUTE and ENTER keys simultaneously once again. It is also important to know that the light will blink two times to indicate that the programming mode is off. Test your programmed buttons!
Troubleshooting
If the remote does not command the gadget, redo programming or power cycling by erasing batteries, pressing any button, and reinstalling batteries. It is also possible to press and hold the MUTE and ENTER buttons simultaneously for 20 seconds to reprogram the remote control.
And that’s it! In your home theater, you can use your custom-programmed DirecTV Genie Remote to easily command your whole system. Why have different remotes when you could have just one that controls it all?
