A Dish Network remote control is handled frequently in a day or a week depending on the number of times it is used. Food particles collected by greasy oily hands, accidental pouring of drinks, dust and dirt, and normal usage can make your Dish remote appear dirty and feel sticky or rough to the touch. By practicing cleanliness on your Dish Network remote, you will find that it has a longer life span and is more effective. Using just a few basic materials and following these quick and easy instructions, your Dish remote can be as good as new!
Supplies You'll Need
- This can be done with dish soap or other mild detergent.
- Water
- Soft, clean clothes or cotton pads
- A toothbrush or any other small brush to be used in case you are using a standard toothbrush.
- Cotton swabs
Step 1: Turn Off Your Dish Network Receiver
Before doing any cleaning, it is relevant to remove the transmission between the Dish remote and the receiver so that the wrong channel or a setting might not be changed in the process of cleaning. You are usually able to do this by pushing the power or the mute button on the Dish receiver itself.
Step 2: Detachment of Batteries
On the back of your Dish remote, find the compartment for the batteries. Take off the battery cover of the flashlight take out all batteries within it and put them aside without misplacing them. Taking batteries off also helps avoid any instances of battery leakage each time the devices are under cleaning.
Step 3: Wipe cleaning debris off the product with a lint-free cloth.
You can use a clean and dry cloth or cotton pad to gently clean any crumbs, dust, grime, or debris that might have accumulated on the surface of your Dish remote. It is especially important to clean areas around buttons and seams where food particles and dirt may get trapped more easily. If some buttons are close together, the best way to remove any dirt stuck in between them is by using the side of the cloth or a toothbrush.
Step 4: Clean with a Detergent
You may take a small basin pour warm water into it and mix a couple of drops of dish soap or any mild detergent. Wash with a little soap to ensure that your remote is not left with soapy or slippery after bathing.
Step 5: Just Like Your Mother Told You Before, Don’t Drench Your Cleaning Cloth
It is also important to use a clean, soft cloth or cotton pad or ball which should be soaked in warm soapy water until fully saturated. Squeeze out until the clothes are not saturated with water.
Step 6. Gently Wipe the Remote
Clean all the areas of your Dish remote control by gently rubbing the damp soapy cloth on the surface of the remote. Use gentle pressure and avoid contact with moisture near doors or connectors. Turn it over and clean the back side also. Rinse with clean water and if there are areas that are still tacky, use the rough part of the cloth or a toothbrush to scrub them.
Pay special attention to the protection of the infrared transmitter on the top of your Dish remote, as moisture in this area can impair the operation of the device. Instead, use a dry cotton swab to remove any dirt or oils around this piece.
Step 7: Rinse off the soap completely Off
Using another fresh dry soft cloth, you should then gently wipe your Dish remote to absorb any soap that might have been left behind during the washing. Make sure there are no droplets of moisture trapped in those areas or around buttons or any opening where liquid may penetrate.
Step 8: Air Dry
Always be sure to let the damp Dish remote dry thoroughly before replacing the batteries or using it again. Stand at room temperature for at least a few hours up to 24 hours depending on the firmness of the schedule. This also avoids cases of moisture damage in the long run, in case it is left wet it should be dried up to the best of one’s ability.
Step 9: Check Buttons
After the batteries have been dried completely, replace them with the Dish remote and press all the buttons to check if everything is working fine before pairing it again to the Dish receiver. Ensure that some of the popular buttons such as the power button, volume control, and channel buttons are proper. If you have a remote for your equipment, use it to ensure that none of the internal components are exposed to water during the cleaning process.
Step 10: Disinfect Periodically
Clean your Dish remote control about once a month using disinfecting wipes or a spray cleaner to keep germs at bay. This aids in the eradication of germs and assists in maintaining the cleanliness of the surface in brief intervals from a deep cleaning session.
How to Protect Your Dish Remote Control
Here are some extra pointers for keeping your Dish Network remote control clean long-term:
- This is important to remove any fingerprints and residue before it hardens on the surface of the device.
- Always, use remote control slipcovers or cases to shield the gadget from dust or spillage during normal use before cleaning.
- Do not take food or drinks when operating the remote control or while watching television. Loose food items such as crumbs and cooking oils are some of the things that attract dirt the most.
- Replace batteries soon once they start developing low charges to prevent leakage.
- Sync this remote with another Dish remote as a backup in case the Dish remote malfunctions or is ruined while being cleaned.
If you follow the cleaning instructions provided in this Dish Network remote control cleaning guide, you can maintain the look and functionality of the remote for as long as possible. A clean remote is also less annoying to use on a day-to-day basis since it is not uncomfortable in the hands. It is only important not to expose it to liquid and to ensure that it dries properly after washing in the best way possible for several instances. If your Dish remote is taken care of properly with basic maintenance, then it has a long life ahead of it.
Ready to upgrade your TV experience? Call us now at (877) 471-4808 to find the perfect Dish Network plan for you! Don’t miss out on great entertainment—our team is here to help you choose the best package and get you started today.
